Wire Wrapped Copper Jewelry Designs

Wire Wrapped Copper Jewelry Designs

Please share the fun on FaceBook, Pinterest, and Reddit!  Thank you!!!!

Even a wood carving – pyrography – line art artist needs a hobby.  Something that
is quick, fun, and inexpensive.  something that you can work in the rec room,
and something that will make fantastic easy gifts.

My extra hobby is wire-bent, wire-wrapped copper jewelry!

The Wire-Bent Links Bracelet, shown above, is a fun design created from a selection of the over 300 bent-wire links that you can create featured in Easy & Elegant Beaded Copper Jewelry, published by Fox Chapel in 2011.

As you practice the wide variety of copper wire bent links that you can create you will end up with a wonderful pile of small, bright, shiny links – ready for your next jewelry project.

By creating a simple straight loop beaded link chain, you now have the bracelet base on which you can hang those links, using a jump ring or split ring.   This is one design where the more the better, so let your creativity run wild.



Supplies include a few simple tools –

flush wire cutters

round nose pliers

nylon grip flat pliers

long nose pliers

18-gauge copper wire

20 – to 24-gauge copper wire

assorted bright, shiny, bling beads

assorted jewelry findings


Books by Lora Irish

Lora Irish Copper Jewelry Book

Easy & Elegant Beaded Copper Jewelry

How to Create Beautiful Fashion Accessories from a Few Basic Steps

You can make affordable and stylish copper wire jewelry with a few simple tools, some wire and beads. Learn over 300 different link styles and how to create your own with step-by-step instructions and outstanding instructional photos!


Wire Wrapped Copper Jewelry Book

Wire-Wrapped Jewelry Techniques:

Tools and Inspiration for Creating Your Own Fashionable Jewelry


This comprehensive guide to wire-wrapping jewelry covers all the techniques beginners need to know!

  • 30 expert wire wrapping techniques step-by-step, including simple loops, cluster wrap, adding beads to wrapping wire, adding a coil element, wrapping sequential layers, and more
  • 8 stylish DIY projects for statement jewelry like necklaces, pendants, hairpins, and earrings
  • Comprehensive guide includes step-by-step instructions, lists of materials and tools needed, and helpful tips and tricks
  • Beginner-friendly for anyone who is new to wire wrapping or just wants to brush up on techniques





copper jewelry bent wire links

Doodle Day #8 – Altered Art Patterns

Doodle Day #8 – Altered Art Patterns

Doodle Day #8 – Free Altered Art Patterns

DIY Bookmaking, Bullet Journals, Scrap Booking, Card Making, Applique Quilting, Pyrography, Wood Carving, Wood Burn Spoons, Wood Carved Spoons, Leather Work, Free Lora S. Irish Patterns to Download

Free Doodle Pattern 022

Free Doodle Pattern 023








Altered Art is the fun of taking an item as an old book and re-purposing it as the base for your craft arts.  The sample to the right is a pen and ink, pencil, and colored pencil drawing worked on the page of an old law dictionary.Altered Book Art

A second interruption of altered art is when we cross-craft by combining multiple crafting skills to create a unique work.  In this sample a relief carving becomes the base for decoupage, pen and ink designs, and even gold and copper gilding.

altered art wood carving

altered art wood carving

Here’s a third sample and a fun one to do if you are a multiple crafter – pyrography, leather crafting, colored pencil artist, and jewelry maker.  Leather Burned Necklaces – free leather burning project.

wood burned leather jewelry


DIY Bookmaking, Bullet Journals, Scrap Booking, Card Making, Applique Quilting, Pyrography, Wood Carving, Wood Burn Spoons, Wood Carved Spoons, Leather Work, Free Lora S. Irish Patterns to Download

Free Doodle Pattern 024

Leather Burned Jewelry

Leather Burned Jewelry

Step 2 – Creating the Copper Jewelry

wire-bent copper jewelry


Wire-bent and wire-wrapped jewelry is an art that is currently in high favor amongst crafters. Jewelry supplies are readily available at most large box craft stores and through online shopping.

For my leather burnt necklaces I chose copper wire and findings, but there is a wide variety of wire types that you can use as silver, silver-coated, black, and colored aluminum. Personally, I prefer copper as it is a soft, easy to bend metal that can be tempered through gently hammering into strong, secure links and chains.

Glass beads and lamp work beads are also a favorite for me in jewelry work, but you will find a wonderful selection of gemstones, cut crystal beads, resin beads, and even bone or shell beads that you can use.
gingerbread cookie

Please share on FaceBook and Pinterest!



completing your necklace

1 Cut an 8” length of 18-gauge copper wire with your flush cutters.

leather burned necklace
2 Grip the wire about 3” from one end in your straight pliers. Bend the wire to a 90 degree angle. Move the wire to your round-nose pliers, gripping the wire at the 90 degree angle. Roll the 3” end around the round-nose pliers to create a small loop.

leather burned necklace
3 Slide the short end of the wire through one of the holes in your leather burnt necklace. Move the wire to center the leather inside of the small loop.

leather burned necklace

secure the loop

4 Grip the top of the loop, where it overlaps the long working end of the wire in your straight pliers. Roll the short end of the wire around the long working wire two to three times.

pyrography leather jewelry
5 Clip the excess short wire with your flush cutters.

pyrography leather jewelry
6 With your straight pliers crimp the cut end tightly against the long working wire.

pyrography leather jewelry
adding beads

7 Slide your chosen beads onto the long working wire. In my necklace I used one 2-mm copper bead, one 16-mm square yellow jade bead, and one 2-mm copper bead.

how to make beaded copper jewelry
8 Grip the working wire in your straight pliers, with the tip of the pliers against the last bead. Bend the working wire into a 90 degree angle.

how to make beaded copper jewelry
9 Place the 90 degree angle into your round-nose pliers and roll the working wire into a small loop.

how to make beaded copper jewelry

adding the chain

10 The second small loop should be created by holding the wire in the same spot or area of the round-nose pliers as you did the first loop. This keeps the two end loops of the bead dangle the same size.

11 Cut two sections of 2- to 3-mm copper chain 7” long each. Slide the last open link of the chain onto the short end of the loop wire. Move the chain link to the center of the loop.

how to make copper jewelry
12 Complete your wire wrapped bead dangles by gripping the small loop in your straight pliers and wrapping the short end wire around the base of the loop two to three times.

how to make copper jewelry

shaping the leather

17 Your leather burned necklace can easily be shaped by simply placing your finished necklace under your kitchen faucet for a few moments, allowing the leather to become wet. Pat the leather necklace dry on a clean cloth. While the necklace is still damp and pliable, lay the necklace on a large, plastic soda glass and with loose (oversized) rubber bands lightly secure into place. Let the necklace dry overnight.

shaping leather jewelry

completed necklace

wood burned leather jewelryIn the next post I will be sharing five more ideas for this leather burned necklace project, with the free patterns.  But here is a preview …

leather burned jewelry by Lora Irish

Leather Burned Jewelry

Leather Burned Jewelry

Art of Leather Burned Jewelry

gingerbread cookiePlease share on FaceBook and Pinterest !!!!


I love combining my crafts and hobbies, and in this project we will be working on a quick, fun design that uses leather working, jewelry making, and, of course, pyrography.  Today we will get together the supplies, cut out our leather necklace shape, and do the pyrography steps.

In the next post you will find the steps for creating the copper, wire-bent jewelry.  Then on day three of this mini-project I will show you how to create 10 quick necklaces out of one pyrography burning that is perfect if you are a craft seller or need a group of Holiday presents this years.

So … let’s get started!

leather burning and pyrography by Lora IrishQuilted Jade Necklace Supplies:
5 1/2” x 3 1/2” (14 cm x 9 cm ) medium weight vegetable-tanned leather
bench knife or craft knife
leather hole punch
cotton swab applicators
gum tragacanth edge finish
wooden edge slicker
#4 – #8 soft pencil for tracing
pyrography pen tips – ball, loop, or micro writing tip
white artist eraser
2 – 16 mm square yellow jade beads
1 – 5 mm x 8 mm yellow jade rectangle bead
6 – 3 mm antique copper round beads
2 – 4 mm copper rosettes
2 – 7” ( 18 cm ) long copper chain
2 – 6 mm split rings
1 – lobster claw latch
18” – 20-gauge or 18-gauge copper wire
satin brush-on leather finish

tracing the pattern

1 Make a printed copy of the pattern for the Quilted Jade Necklace. Cut the pattern out using scissors.
Lay the paper pattern on the raw-hide side of the leather scrap. Using a soft, #4 – #8 pencil, trace around the outside edge of the paper pattern.

leather burning by Lora Irish

working the leather

2 Place the leather on a cutting mat with the raw-hide side up. Using a craft knife or bench knife, cut the necklace free from the scrap leather. Save the extra scraps from the cut leather block for smaller bracelet shapes and earrings.

leather pyrography by Lora Irish

3 With a white artist eraser, remove any remaining pencil guidelines from the raw-hide side of the leather necklace.

leather pyrography by Lora Irish

creating the grid lines

4 Using the cutting mat ruler marks as your guidelines, create a diagonal 1” square grid on the tanned side of the leather with a soft, #4 – #8 pencil.

leather working and pyrography

5 – 6 With a leather hole punch, cut a 3/16” or 1/4” hole in each side of the necklace to receive the jewelry chain and beads. Create one hole at the center point of the bottom edge of the leather necklace to receive a bead dangle.

leather jewelry DYI

leather jewelry DYI

finishing the raw edges

7 With a cotton or wool swab applicator, apply one coat of gum tragacanth along one edge of the leather necklace.

pyrography on leather
8 Briskly rub the damp edge with a wooden edge slicker. The handle of a large wooden spoon works well in place of a slicker. The gum tragacanth and slicker will polish and round the raw cut edge of your necklace.

pyrography on leather

burning the fill textures

9 The pyrography burning for this project is worked as a texture and fill practice board, where each 1” square is filled with a different, small pattern. Have fun creating your own fill patterns or refer to the Fill Pattern Chart with our Mushroom Doodle Pyrography Project.

pyrography zen doodles
10 As you work each 1” square, vary the temperature setting of your pyrography pen to create some squares with pale tonal values, some with medium values, and some with dark toned values.

pyrography zen doodles

adding borders

11 With a ball-tip or loop-tip pen, on a hot temperature setting, work along some of the pencil grid lines with a series of evenly spaced, small dots. With the straight edge of a shading pen tip, work the remaining grid lines with evenly spaced, short dash lines.

wood burning on leather
shading the lower edge

12 You can add a little touch of shading along the bottom edge of your leather necklace using a shader-tip and a medium temperature setting. Work this layer of shading right over the fill and texture patterns that you have already burned. Rub a white artist’s eraser over your burned surface to remove any dirt, oil, or remaining pencil lines from the leather. Dust with a dry cloth.

leather burning by Lora Irish

pyrography close-up

wood burned leather jewelryClick on the leather cutting patterns below for a full-sized pattern.

leather cutting pattern for jewelryHere are two more ideas for your leather burned jewelry necklace, worked with patterns from our Henna Tattoo Pattern Pack.

leather burned necklace


And, this one!

leather burned necklace
In the next post I will be showing you how to add your jewelry chain, bead dangles, and copper findings.  So, check back soon!