Cross-Crafting Seminar, Colored Pencils in Pyrography

Cross-Crafting Seminar, Colored Pencils in Pyrography

Since this seminar is all about how to incorporate multiple hobbies into one project, during this posting we will be using colored pencils to create skin coloring for our scroll saw cut, wood burned Wood Spirit face.

You might like to visit another one of our colored pencil – pyrography project, Coloring your Wood Burning Projects.

Cross-Crafting Seminar Introduction
Cross-Crafting Seminar Supply List
Cross-Crafting Seminar Free Patterns
Cross-Crafting Seminar, Scroll Saw Basics
Cross-Crafting Seminar, Setting Up Your Scroll Saw
Cross-Crafting Seminar, Scroll Sawing the Wood Spirit Face
Cross-Crafting Seminar, Wood Burning the Wood Spirit Face
Cross-Crafting Seminar, Colored Pencils for the Wood Spirit Face

Supplies:

There are several excellent brands of colored pencils that we can use in pyrography.  I strongly suggest that you invest in an artist quality or artist grade set.  Student grade or school grade colored pencils, as those that come with the new Adult Coloring Books are often chalk-based and do not apply to wood in a smooth, easy to blend layer.  Artist quality pencils are wax-based or watercolor-based, apply easily and evenly across your wood, paper, and even fabric.

The following are a few of my favorites, available at Amazon.com and I do mix and match manufacture brands in any project!

Prismacolors are my favorite for watercolor paper, vellum, and chip board colored pencil work. These have a soft wax core, blend easily, and will leave a nice, rich coloring with light strokes.

Prismacolor Premier Colored Pencils, Soft Core, 48 Pack

Prismacolor Watercolor Pencils

I use my Derwents for adding coloring to wood burnings on wood.  Derwents have a harder core than Prismacolor and are perfect for getting into the tight wood grain and deeply scored pyrography detailing that some of our wood burnings have.

Derwent Colorsoft Pencils, 4mm Core, Metal Tin, 24 Count

Derwent Drawing Pencils, Inktense, Watercolor, 24 Per Pack

Lyra is a must-have for anyone who does a lot of skin tone work.  This pack has twelve extra-large pencils in the most common skin colors.  No mix, no mess, just chose the shade for your shadows, highlights, and general skin tones.

Click on any image for a large photograph.

Lyra Color Giants Skin Tone Colored Pencils

colored pencils in pyrographyStep 1 Since my wood spirit will become the end caps to a small, outdoor bird feeder I have chosen basic, strong colors for my project’s skin tones.  As we work through these steps you will be able see how working one color of pencil over another creates new color hues in your project.

You do not need a large set of pencils.  A set between 12 to 24 is enough colors to create a wide range of hues by working one color over another.

Note: Colored pencils apply best when laid down in light-pressure, thin layers, not heavy-pressure one-step coloring.  Thin layers allow the wood burning shading to clearly show through the hues and can be developed with additional layers to create deep, rich color tones.

Keep your pencil points sharp so that the point can easily reach into the fine crevices of the burned strokes and wood grain.

New colors can be created by working thin layers of one color over another color.  For best results apply the darker toned color first then lay the paler color tone on top.

colored pencils in pyrographyStep 2 We may refer to skin colors as white, yellow, red, brown, or black, but all skin colors are simply shades of orange.  All humans have orange colored skin!  Some of us may have pale white-orange skin, and others a red-orange tone, and some such a deep coloring of orange that it appears almost black … but everyone of us is orange!

To learn how to get that perfect skin color every time. please read Adding Skin Colors to Wood Burnings.  It is an in-depth look at the mixing color hues to get just the right shade of orange for your portrait.

The base shadow color for my wood spirit is black cherry – a rich, deep red-purple. Work several light layers of black cherry over the areas of shading in the face that you created with your wood burning steps.

Since all skin tones are shades of orange, we are using a purple-toned colored pencil for a our base shading step.  Purple is the compliment to orange and when the orange pencil is worked over this purple shading the finished coloring will be a rich shade of brown.

Let your pencil lines show, let them go in random directions, and keep the pressure on the pencil tip light.  The random lines add to the wild look of the wood spirit.

colored pencils and pyrographyStep 3 Since I want my wood spirit wild and woolly I am adding more shading over my base of black cherry using a deep ultramarien blue colored pencil.  Work several light layers of ultramarine blue in the same general areas as the pyrography shading on the face, but do not cover up all of your black cherry work.

Skin is transparent, while it does have pigment you can see through the skin to the vein and bones in the body.  Blood veins often have a bluish cast under the skin, so in our wood spirit we can use the ultramarine blue to pick up that effect.

Just as we allowed the wood burning shading of the face to move into the hair strand area, take some of this colored pencil shading into those same areas.

colored pencils in pyrographyStep 4 A couple of light layers of forest green shading blends the shadow areas of the face.  Note in the photo that no area of the shading now has one individual strong coloring, but instead has a speckled, blended effect.  Green works just as tones of blue in portrait coloring, implying the under-structure of bone and veins.

 

 

 

 

colored pencils and pyrographyStep 5 Now that you have the shadows well established in the face it is time to overlay the general skin tone.  I used a medium rust-brown pencil for this general overlay.  Apply several light layers of coloring to the face.  Allow some areas of the original wood uncolored to create your highlights – the center of the forehead, the outer corners of the upper eye lids, the center of the eye wrinkles below the eyes, the center line of the nose, the center of the cheeks, and the center of the mouth.

As with all of the other colors, work these layers of skin tone directly over your previous colors, and expand your coloring area towards the areas that you will leave as highlights.

Two light coats of this general skin tone is also applied to the mustache and beard area of the face to give it just a touch of color toning.

colored pencils and pyrographyStep 6 Several light coats of orange is applied to the entire face – over the shaded areas and the highlights.  This orange is what gives the skin its warmth, makes it feel alive.

 

 

 

 

 

 

Step 7 colored pencils and pyrographyI decided that I wanted my wood spirit to have a darker base coloring to his skin tone.  So I have added a few layers of a darker brown skin colored pencil.

 

 

 

 

 

 

colored pencils and pyrographyStep 8 My highlights in the face as of Step 7 are in bright orange.  To add those bright reflective spots on the high areas of the face I use Titanium white.  Again, use freely moving strokes and let your pencil lines show.

In this photo you can note that my pencil is two-toned.  When a colored pencil becomes to short to place in the pencil sharpener or too short to hold comfortably, simply super glue the blunt end to the end of another pencil!

 

 

colored pencils and pyrographyStep 9 I want my wood spirit to have grey-white hair, so I will be using the coloring of the birch wood as my base color for all of his hair and beard.

To create individual strands of hair I used the Titanium white pencil, and worked long, curving lines of white from his face towards the outer edge of the hair area.

This white is worked in those hair strands that are closest to you, on top of other strands.  Click on the image for a close-up.

colored pencils and pyrographyStep 10 Using a medium grey or french grey colored pencil I have added more hair lines into the mid-ground and background hair strands.  Again, let your pencil lines show.

 

 

 

 

 

 

colored pencils and pyrographyStep 11 My last step is to intensify the white throughout the wood spirit’s face and hair.  As this is the last layer of colored pencil work I can add extra pressure to the pencil to create thicker line work.

Once the coloring is completed I give my wood burned colored pencil projects a light coating or Reworkable Spray Fixative.  This is a matte toned finish that protects the work you have already accomplished but that also allows you to add more colored pencil work over your piece.

This protects the work I have done while I decide what final finish I may want for the project.  Since this scroll saw wood spirit and its matched gang-cut piece will become the end pieces for my small bird feeder, it will eventually be finished with polyurethane after it is attached to the feeder.

Thanks for reading ….. tomorrow we will be working on scroll saw cutting our wooden spoon and the wood carving steps for that project.  See ya’ there!

 

 

 

0
Cross-Crafting Seminar – Wood Burning the Wood Spirit Face

Cross-Crafting Seminar – Wood Burning the Wood Spirit Face

Wood Burning the Wood Spirit FaceDuring this Cross-Crafting Seminar we have looked, in-depth, at how you can use a scroll saw to add new dimensions your wood carving and wood burning projects.  In today’s post we will be wood burning the Wood Spirit face that we scroll saw cut in the last session.

If you are new to pyrography, please visit our links page Pyrography, found in the header nav bar.  This will give you lots of links to the tutorials, teaching sessions, and techniques posted here at LSIrish.com about wood burning.

As we work through these next two session to this seminar you will see that I am using pyrography to set my shadows and hair lines in the wood spirit face.  We will then use colored pencils to add the coloration.

Note: If you are new to pyrography, in our right hand nav bar you will see a free PDF on which pen tips to use, and what burn strokes each create.  Please download it now.

Cross-Crafting Seminar Introduction
Cross-Crafting Seminar Supply List
Cross-Crafting Seminar Free Patterns
Cross-Crafting Seminar, Scroll Saw Basics
Cross-Crafting Seminar, Setting Up Your Scroll Saw
Cross-Crafting Seminar, Scroll Sawing the Wood Spirit Face
Cross-Crafting Seminar, Wood Burning the Wood Spirit Face
Cross-Crafting Seminar, Colored Pencils for the Wood Spirit Face

Introduction and Supplies:

Wood burning tool – for this project I used my Optima
Spear-point, or flat shader pen tip
Ball- or looped-tip pen
Heavy-gauge wire triangle hair tip
#6 to #8 soft graphite pencil
green painter’s tape
white artist eraser
large scrap of brown paper bag
leather strop and honing compound

My recommended wood burning tool favorites include the Walnut Hallow Versa-Tool for first time pyrographers.  If you are ready to up-grade to a high-end, variable-temperature tool then I suggest either the Colwood or the Optima.

Below each pyrography tool listed is a link to an in-depth seminar that will not only give you a free, step-by-step project you can start today, but also allow you to see each of the three pyrography tools in use to help you decide which unit is the best for you.

These three in-depth tutorials are hosted on a wood carving forum.  Unfortunately I am banned/blocked from posting to this forum now because of technical difficulties on this forum.  So, if you have questions or comments about these three projects please email me here, through my blog.  Do not post to these threads as I can not read, see, or answer your questions there!

Walnut Hallow Versa-Tool

Walnut Hollow Versa-Tool Toucan Project  –  Looking for that first wood burning tool, then take a few moments and read through this tutorial for an in-depth review of the Walnut Hollow Versa-Tool used to wood burn a Toucan Family.

Colwood

Colwood Winter Birdhouse Wood Burning Tutorial – This in-depth, step-by-step project focuses on a winter bird house wood burning scene.  The project takes you from the initial tracing of the design to the final coloring steps.

Optima

Irish Optima Pyrography Seminar  – This in-depth pyrography project shows over 250 detailed, close-up photos, step-by-step instructions, and in-depth explanations of texturing, shadings, and fine line work used to create the Advertising Barn landscape.

Note: Click on any image for a full-sized photograph.  Now, my apologizes!  I know that some of these photos are dark.  I accidentally got such a sharp polish on my wood during the crumpled paper stage in Step 1 that the wood had too high a reflective quality for the photography lights … AH!

Tracing a Pyrography PatternStep 1 Transferring a Pyrography Pattern

Before your trace your pattern, take a few moments to lightly sand your wood using a crumpled brown paper bag.  Paper is an extremely fine-grit sanding media and will remove any remaining fine wood fiber, polishing the wood surface.

There are several ways to trace your wood burning pattern to your burn surface, and those are explored in the link above.  For this project I chose to rub the back of my pattern with a soft, #6 to #8 graphite pencil.  Tape the pattern to the scroll saw cut wood with the pattern showing and the graphite surface against the wood.  Use an ink pen to trace over all of the lines.

The graphite from the pencil rubbing will leave a medium-toned grey line on your wood.  It can easily be burned over as you work your pyrography and then removed using a white artists eraser when the pyrography is completed.  Carbon paper, graphite paper, and newspaper tracing can leave permanent – non-removable – lines on your work … a pencil rubbing is the cleanest media for tracing.

Wood burning the wood spirit faceStep 2 Basic Woodburning Strokes and Textures

Using a flat, or spear-shaped shader, set your wood burning unit to a medium temperature.  For my Optima that is a setting between 4 and 5.  Lay the shader with the flat bottom of the shader on the wood, along the cheek at the side of the nose.  Using a smooth, even pull shade along the nose edge.

The inner corner of the eyes at the nose bridge is the deepest shadow point in the face.  The second deepest is the bottom corner of the cheek at the edge of the nostrils.

Note: Every wood burner unit manufacture has their own name for their own pen tips.  As example a looped tip can also be called a standard writing tip by a second manufacture or if it is from a third manufacture it can go by just an SKU number.  So the names for each tip can change according to what unit you are using.  Please check the photos for what shaped pen tip I am using and then use the closest tip you have for your unit.

Shading the wood spirit face in pyrographyStep 3 The dark shading continues, using the flat or spear-shaped shader along the bottom edge of the nose.  An extra dark c-shaded stroke is used to create the black of the nostrils.

At the bottom of the cheeks, next to the nose is a wrinkle area that is triangular.  This area is deeply shaded towards the black-brown tonal value.

The eye lids and eye wrinkles are shaded along the bottom edge of the pattern line, with the darkest shading near the nose and allowing the stroke to pale as you pull it towards the outer edge of the face.

With a light touch, shade the sides of nose.  Allow a very thin line of white – un-burned – area at the outer nose pattern line.

wood burning the wood spirit faceStep 4 Turn your wood burning unit down to a cool-medium tone.  For my Optima that is a setting just below 4.  Using the flat or spear-shaped shader shade along the outer cheeks, sides of the face and the forehead area of your wood spirit.  Allow some of this shading to move into the hair areas of the face.

Darken the inside of the mouth and the small space below the nose that separates the sides of the mustache with a medium- or hot- temperature and the flat shader.

 

 

wood burning the wood spirit faceStep 5 Begin shading the top or inner areas and sides of the hair strands using the flat or spear-shaped shader and a medium temperature setting.  The heaviest shaded hair sections are top of the mustache and the beard that is trapped inside of the sides of the mustache.  Use long, flowing lines to imply individual hair strands.

 

 

 

 

wood burning the wood spirit faceScan to this stage of the work: Click for a larger image.

 

 

 

 

 

 

 

wood burning the wood spiritStep 6 I have changed to my ball-tip writing pen and set my temperature to a high setting.  For my Optima that is between 6 and 7.  With the ball-tip, outline all of your pattern lines for both the face and the hair strands.

 

 

 

wood burning the wood spirit faceStep 7 Take a moment and with a white artist’s eraser remove any remaining tracing lines that are visible.  Use a dry, clean cloth to remove the eraser particles.

Colored erasers, like the bubble gum pink school erasers, can leave streaks of dye color on your wood surface that can only be removed by sanding that area back to the un-burned, raw wood.  White erasers have no dye and will not mar your burning.

 

wood burning the wood spirit faceScan to this stage of the work: Click for a larger image.

 

 

 

 

 

 

 

wood burning the wood spirit faceStep 8 On the high temperature setting, using a heavy-gauged wire hair tip begin adding the individual strands of hair.  Each strands is worked from its closest point near the face out towards the outer edges of the hair strand.

Since we will be adding colored pencils to this project not every strand of hair needs detailing.  For my wood spirit I chose those hair strands that were in the background of the design for his head hair, and at the top of the mustache and beard.

But hair is just plain fun to work, so add as much detailing as you like!

If you do not have a heavy-gauge wire hair tip you can use the side or edge of your shading tip to burn wonderful hair lines.

wood burning the wood spirit faceStep 9 The finished wood spirit can be left in just its pyrography stage or you can follow me in the next posting where we will use colored pencils to add his skin tones.

 

 

 

 

 

 

0
Cross-Crafting Seminar, Setting Up Your Scroll Saw

Cross-Crafting Seminar, Setting Up Your Scroll Saw

Setting Up Your New Scroll SawWhere and how you set up your scroll saw is extremely important to the quality of cutting your can do in your new craft.  We will take a qick look at several options to placing your saw into the most comfortable, accurate cutting position as possible.

Cross-Crafting Seminar Introduction
Cross-Crafting Seminar Supply List
Cross-Crafting Seminar Free Patterns
Cross-Crafting Seminar, Scroll Saw Basics
Cross-Crafting Seminar, Setting Up Your Scroll Saw
Cross-Crafting Seminar, Scroll Sawing the Wood Spirit Face
Cross-Crafting Seminar, Wood Burning the Wood Spirit Face
Cross-Crafting Seminar, Colored Pencils for the Wood Spirit Face

 

I am lucky enough to have both a full-dedicated woodworking shop and a craft studio.  My shop holds my table saw, drill press, band saw, as well as an extra-large work table where I can clamp, glue, and sand.  The craft shop is where I work on my smaller projects as my wood carving and wood burning.

But, for right now, I am setting up my scroll saw on my back porch!  Since the Ryobi 16″ Variable Speed Scroll Saw is quite portable I can store the tool in its shipping box in the studio when I am not using it, and then move it to the porch for those quick cuts or full-length projects.

Setting Up Your New Scroll SawThe reason I am working off the back porch is because I have an old, hard-used dry sink that measures 38″ from the floor to the table top – a perfect height for me for scroll saw cutting.  The base of the dry sink holds two shelves where I store several furniture clamps, my vise, and some of the woodworking tools that I need around the studio.

For me, a standing position is the most comfortable for accurate cutting.  The height of this dry sink lets me look into the saw blade area of the scroll saw at a 45 degree angle – perfect to see exactly where the blade is in the wood and to clearly see the cutting line on the pattern.  Note position #2 in the photo.

A standard table is only 30″ tall at the top of the table.  If you are in a standing position this puts your focus point directly on the wood.  While you can see the pattern line clearly, this high angle obscures your view of the saw blades working edge. Note position #3 in the photo.

If you chose a sitting position using a kitchen chair, at a standard table your visual view is at a very low angle to the saw.  You now see the full length of the saw blade but can barely see your wood or pattern line. Note position #1 in the photo.

There are several easy, inexpensive options for your new scroll saw table.

  1.  You can purchase scroll saw stands that are heavy-weight metal made specifically to hold smaller-sized power tools.  These are great if you have a full-dedicated workshop.  The stands often are made to have a plywood table top which bolts to the stand.  You can then bolt your scroll saw to the table top to reduce vibration.
  2. Check you have a local Habitat for Humanity ReStores your tall kitchen cabinets or bathroom cabinets at extremely reasonable prices.  Again, you will need to create a table top, out of 5/8″ plywood which you bolt to the cabinet.  If your kitchen cabinets are a bit short you can create a plywood box for the table top that brings your saw up to the perfect height for you.
  3. If you are using a regular table, studio table or kitchen table, which are only 30″ high, you may want to purchase a tall bar stool for just a few dollars at your local GoodWill.  Since you can’t safely raise the height of your saw you can easily raise yourself to get that 45 degree view of the saw.

A few more considerations.

I find that I do need a wide foot print around my scroll saw as I work.  I tend to move my body, re-position my stance left or right, as I move through the curves.  So I work in an area where I have about 2′ to 3′ feet of clear space on either side of the scroll saw table.

Because of the amount of dust created by the saw I find that a good, heavily-textured floor mat gives me a firm stance on the floor.  Saw dust can be quite slippery!  A 4′ x 5′ bound-edged rug works well, but you can also purchase heavy rubber floor mats meant for shop use.

Be sure that your working table is firmly set on the floor.  Shim the table legs or base if necessary to insecure you have a secure working space.

If your scroll saw is light-weight, does not have a heavy iron base, you will want to secure the saw directly to the table top.  You can either bolt the scroll to the table as most scroll saws have holes pre-drilled in the base to permanently set the saw to its stand or table.  You can also use furniture clamps to secure the saw base to the table.

Never set your scroll saw on an unclamped or unsecure surface to raise the level of the blade to a better visual view … don’t set it on a stack of scrap plywood, stack of books, or a cardboard box.  Any of these ‘solutions’ can slide out from under the saw or simply colapse while the saw is running.  Instead, if you need to raise the level of the saw, do so by raising the entire table or cabinet using a 2″ x 4″ frame bolted directly to the bottom of the table.

To reduce any excess vibration try setting your scroll saw on a non-skip kitchen matt before you clamp it to the table.  These matts are very inexpensive security!

 

 

0
Cross-Crafting Seminar Supply List

Cross-Crafting Seminar Supply List

wood carving toolsSupply List for our cross-crafting seminar includes tools for scroll sawing, wood carving, pyrography, and colored pencil art.

Cross-Crafting Seminar Introduction
Cross-Crafting Seminar Supply List
Cross-Crafting Seminar Free Patterns
Cross-Crafting Seminar, Scroll Saw Basics
Cross-Crafting Seminar, Setting Up Your Scroll Saw
Cross-Crafting Seminar, Scroll Sawing the Wood Spirit Face
Cross-Crafting Seminar, Wood Burning the Wood Spirit Face
Cross-Crafting Seminar, Colored Pencils for the Wood Spirit Face

The tools I am listing are tools that I own and use on a consistent bases. But, of course, you can substitute with the tools you already own.  As a teacher I always suggest that you start a new hobby with an entry-level tool set, not a dirt-cheap tool set.  Begin with the best set you can easily afford, then if you love the craft as I do you can add new, higher quality tools as you discover what style of carving or pyrography you will be doing.

As example, as a pyrographer I suggest that you start with a basic Walnut Hallow Versa-Tool which will cost you between $25 to $30.  This lets you experience wood burning before you decide if you want to invest in higher units as the Colwood or Optima, which can cost around $175 with burning unit and two or three pens.

For an in-depth look at a wood carver’s tool kit please visit Basic Tool Kit for the Wood Carver.

 

Basswood carving wood

3/8″ to 1/2″ thick x 3″ wide x 12″ long basswood blanks for shallow, stirring spoons or hair combs
3/4″ to 1″ thick x 3″ wide x 12″ long basswood blanks for deep, dipping spoons

I purchase my basswood off of EBay.com because I can see the actual wood that I am purchasing.  Most basswood offerings on EBay are available in multiple packs of boards, all cut to the same dimension.  Search under ‘basswood carving wood’.  For larger boards search under ‘basswood lumber’.

 

Ryobi Scroll SawScroll sawing

Ryobi 16″ variable speed scroll saw

Assorted Ryobi scroll saw blades

Safety glasses

Please stop by our opening post for this cross-crafting seminar for a quick look at the Ryobi 16″ Variable Speed Scroll Saw.

 

 

Interchangeable tool and handle wood carving setsWood carving beginner’s tool set

Set of wood carving tools – straight chisel, skew chisel, v-gouge, large round gouge, small round gouge.  Below is a listing of four suggested sets that will not only get you started in wood carving, but will last you for years.

Available on Amazon.com – 8 pc Woodpecker big  wood carving tool set
This is an excellent beginner’s carving kit with large tools that can be used by hand or with a mallet.  For our project it contains a deeply bend round gouge, perfect for deep bowled spoons.  Also included is two wide sweep gouges and two tight round gouge.

Available on Aliexpress.com – 8 pc Woodpecker big wood carving tool set
This is the same set as described above but through Aliexpress, a selling site based in China.  The price is quite different, but you will have to wait up to three weeks for the tools to arrive in the mail.

Available on Aliexpress.com – 8 pc Woodpecker small wood carving tool set
Woodpecker also makes a small carving tool set which is perfect for a beginner carving that will be working multiple styles of wood carving.

Available on Amazon.com – Flexcut 11pc interchangeable blade tool set
The Flexcut set has one handle and 11 interchangeable blades. The blades are easy to change-out and hold securely in the handle. This is a great set that will last you for many, many years if you have a little extra to invest.

Available on Amazon.com – Ramelson 6 pc palm carving set 117
I have used Ramelson tools for nearly thirty years.  They are thin bladed tools that hold a crisp, perfect edge and priced reasonably for the beginning carver.  The palm handles are wonderful for those of us that have arthritis as the push of the cutting stroke comes from the center of the palm of the hand instead of from the fingers.

 

Choosing quality steel bench knives for wood carvingBench knife

Available from ChippingAway – ChippingAway.com large chip carving knife

Available on Amazon.com – Flexcut 1pc Carving Knife

Available on Amazon.com – Flexcut 3pc Carving Knife Set

 

 

Walnut Hollow Versa-ToolPyrography

Below each pyrography tool listed is a link to an in-depth seminar that will not only give you a free, step-by-step project you can start today, but also allow you to see each of the three pyrography tools in use to help you decide which unit is the best for you.

These three in-depth tutorials are hosted on a wood carving forum.  Unfortunately I am banned/blocked from posting to this forum now because of technical difficulties on this forum.  So, if you have questions or comments about these three projects please email me here, through my blog.  Do not post to these threads as I can not read, see, or answer your questions there!

Walnut Hallow Versa-Tool

Walnut Hollow Versa-Tool Toucan Project  –  Looking for that first wood burning tool, then take a few moments and read through this tutorial for an in-depth review of the Walnut Hollow Versa-Tool used to wood burn a Toucan Family.

Colwood

Colwood Winter Birdhouse Wood Burning Tutorial – This in-depth, step-by-step project focuses on a winter bird house wood burning scene.  The project takes you from the initial tracing of the design to the final coloring steps.

Optima

Irish Optima Pyrography Seminar  – This in-depth pyrography project shows over 250 detailed, close-up photos, step-by-step instructions, and in-depth explanations of texturing, shadings, and fine line work used to create the Advertising Barn landscape.

 

Pyrography Pen Tips by IrishSuggested pyrography tool pens

For more information of pyrography pen tips and what style of burned stroke each creates please download our free PDF on Pyrography Pen Tips, posted on our Wood Carving and Pyrography Pattern website, ArtDesignsStudio.com.  Scroll down to the lower portion of the page.  Please chose pens that are manufactured by the company that made your wood burning unit.

general writing or fine line tip – ball tip or loop tip pen
general shading tip – spear tip or pointed shader tip

 

tracing a pyrography patternGeneral supplies

Sharpening stones, leather strop, and honing compound
For more information please read our blog posting on Sharpening Your Carving Tools

Sandpaper – 100-grit to 220-grit sandpaper, sanding blocks in assorted grit sizes, foam-core finger nail files

Carving gloves – Please check what size glove you need before ordering!

Available on Amazon.com – NoCry Cut Resistant Gloves

Available on Amazon.com – Boss Knit Kevlar Gloves

 Lora Irish color chartBrown paper bags

Graphite paper

#4 – #6 soft graphite pencil for tracing

Masking tape or painters tape

 

Set of colored pencils

Available on Amazon.com – PrismaColor set of 12 soft-core pencils

Available on Amazon.com – PrismaColor set of 72 pencils

 

0
Scroll Saw Patterns at Art Designs Studio

Scroll Saw Patterns at Art Designs Studio

A Lora Irish FaceBook follower asked to try one of the patterns from my scroll saw books, North American Wildlife Patterns and World Wildlife Patterns for the Scroll Saw.  Since I am sharing it with him, I thought I would share it with everyone.  Both patterns below are full-size, 100 dpi, 8 1/2″ x 11″ patterns, just like every pattern on my pattern website Art Designs Studio.

Simply CLICK on the pattern image.  A new window will open with the full-sized pattern.  RIGHT HAND CLICK and SAVE to your desktop.  They are ready to re-size in your graphics program or just print for the large image.

Hope you enjoy them, and if you do, the books are available at Amazon.com.

 

North American Wildlife Patterns for the Scroll Saw by Lora S IrishNorth American
Wildlife Patterns
Scroll Saw
World Wildlife Patterns for the Scroll Saw by Lora S IrishWorld Wildlife Patterns
for the Scroll Saw
by Lora Irish

Lora Irish scroll saw patternsClick on the image above for a full-sized,
100 dpi, 8 1/2″ x 11″ free
Lora Irish Scroll Saw Pattern

 

Lora Irish scroll saw patternsClick on the image above for a full-sized,
100 dpi, 8 1/2″ x 11″ free
Lora Irish Scroll Saw Pattern

For my applique quilters, try these two patterns with our free e-project Summer 2013 Quilt Project at ArtDesignsStudio.com .

Free Fretwork Butterfly Quilt Project by Lora IrishPlease LIKE us on FaceBook!

0