carving project

Scroll Sawing the Wood Spirit Face

Scroll Sawing the Wood Spirit Face

Scroll Sawing the Wood Spirit Face

Cross-Crafting Seminar Introduction
Cross-Crafting Seminar Supply List
Cross-Crafting Seminar Free Patterns
Cross-Crafting Seminar, Scroll Saw Basics
Cross-Crafting Seminar, Setting Up Your Scroll Saw
Cross-Crafting Seminar, Scroll Sawing the Wood Spirit Face
Cross-Crafting Seminar, Wood Burning the Wood Spirit Face
Cross-Crafting Seminar, Colored Pencils for the Wood Spirit Face

Our next step in our Cross-Crafting Seminar, which takes a look at using scroll sawing, wood carving, pyrography, and colored pencil work in one project, is to do a test cut.  Let’s use a classic Wood Spirit face for this practice session.  This face comes from my book, Wood Spirits and Greenmen, and the pattern is linked below.

Click on the pattern image to open a new window with the full-sized pattern.  Save a copy of the pattern to your desktop, where it will be easy to find later.

Scroll Sawing the Wood Spirit FaceSupplies

Ryobi 16″ Variable Speed Scroll Saw
Ryobi 15 TPI Regular Tooth Saw Blade for general scroll saw work
Temporary Adhesive Spray
2 – 12″ x 12″ x 1/8″ sheets of birch plywood
220-grit sandpaper
Sheet of heavy brown paper bag
Green painter’s tape
2 printed copies of the Wood Spirit pattern

Note:  I buy my birch plywood and basswood off of Ebay.com because I can see the actual pieces of wood that I am purchasing.  Birch plywood is often available at your local hardware store or large box craft store.

Preparing for Cutting

Scroll Sawing the Wood Spirit FaceStep 1 For this step-by-step I am going to cut two plywood wood spirit faces at the same time. This is called gang cutting.

Lightly sand both sheets of birch plywood on both sides using 220-grit sandpaper.  Work the paper in the direction of the grain lines of the birch wood to avoid creating small, cross-grain scratches.  Wipe the plywood with a clean, dry tact cloth.  Crumble a large sheet of heavy brown paper bag into a loose ball.  Use the crumbled paper to sand over the surface of both sheets of plywood.  Brown paper bags are wonderful, extremely fine sanding papers.

Step 2  Print two copies of the pattern. One will be used to cut the Wood Spirit face shape from the wood.  The second will be used to trace the Wood Spirit detail lines to the cut-out, scroll sawed shape.

Scroll Sawing the Wood Spirit FaceStep 3  Stack the two sheets of plywood with the best sides facing each other, these will be on the inside of the stack with the rougher sides facing outward.  Use several strips of green painter’s tape along the edge of the stack to secure the two pieces together.

Step 4  Read the directions on the side of your temporary adhesive spray, and follow those directions to spray the back – reverse – on your cutting pattern.  Place the pattern, face up with the spray adhesive against the wood.  Lightly rub the paper pattern from the center out  towards the corners to flatten the paper and insure that it is completely adhered to the wood.  Let the paper dry for a few minutes before you beginning your scroll saw work.

Step 5 If this is your first scroll saw session, please read all of the instructions and safety procedures that came with your model of scroll saw.  Insert a 15 TPI regular/general cutting blade in the saw.  Remember, the teeth of the saw blade point down.

Note:  When I am cutting out a general shape, as with the Wood Spirit, I am not as concerned about exactly following the pattern line as cutting a smooth line!  You will see that in some areas I may have cut inside or outside the pattern line.  Since no one but me and you will ever see the original pattern whatever I cut will become the final items.  So relax, have fun, and know that it is so OK to wander off the line.  This is meant as a practice piece, a piece on which you can learn, experiment, and make mistakes.

Scroll Sawing the Wood Spirit FaceStep 6 Loosen the Drop Foot Knob on the left of the scroll saw arm.  Allow the Drop Foot to lower onto the plywood.  Tighten the Drop Foot knob.  This foot keeps the wood held tightly against the work table, stopping the wood from vibrating as the blade moves through the cuts.

Do not add any pressure to the Drop Foot. By just setting it on the board you are cutting it will have the correct pressure when you tighten the knob.

 

Scroll Sawing the Wood Spirit FaceStep 7 Begin your first cut at the top of the board, cutting towards the head, following one of the hair strands.  Start the saw before your blade touches the wood, then glide the wood into the working saw blade.  Move slowly, allow the blade to do the work for you.  Stop the cut when saw blade’s motion when you reach the inside angle or v-shape point of the hair strand.

 

 

 

Scroll Sawing the Wood Spirit FaceStep 8 Turn off the saw, lift the Drop Foot by releasing the Drop Foot knob, and back the blade out of the cut and out of the board.

 

 

 

 

Scroll Sawing the Wood Spirit FaceStep 9 Make the second cut, starting at the top of the board, cutting towards the head, on the second side of the same hair strand.  Stop the cut when you meet the end of the first cut.

 

 

 

Scroll Sawing the Wood Spirit Face Read More »

scroll saws for wood carving and pyrography

Cross-Crafting Scroll Saw Basics

Basics to Scroll Saws

During this session we will take a quick look at the features of a basic scroll saw, and walk through the steps to changing your scroll saw blade.  The scroll saw shown is a Ryobi 16″ variable speed.

Cross-Crafting Seminar Introduction
Cross-Crafting Seminar Supply List
Cross-Crafting Seminar Free Patterns
Cross-Crafting Seminar, Scroll Saw Basics
Cross-Crafting Seminar, Setting Up Your Scroll Saw
Cross-Crafting Seminar, Scroll Sawing the Wood Spirit Face
Cross-Crafting Seminar, Wood Burning the Wood Spirit Face
Cross-Crafting Seminar, Colored Pencils for the Wood Spirit Face

Ryobi Scroll SawClick on any image for a full-sized picture of that step.

Read Your Manual

Begin by reading the information and instruction manual that came with your particular scroll saw, especially the safety steps.

  1. Wear safety glasses.
  2. Use the correct blades made for your specific scroll saw.
  3. Check the condition of your saw blade before you begin any working session.
  4. Always know where your fingers are in relationship to the saw blade.
  5. Unplug the saw and remove the Child’s Safety Plug when not in use.
  6. Watch for physical and visual fatigue – take frequent breaks.

Scroll Saw Features

The Ryobi features a Tension Knob for quick and easy blade tension adjustments on the top back of the machine.  The Sawdust Blower keeps the wood clean of sawdust in front of the saw blade.  The Drop Foot holds the wood securely to the work table to reduce vibration and the Throat Plate gives you access to the bottom of the saw blade.

Ryobi Scroll SawThe On/Off Switch is on the lower front of the motor and also contains a Child’s Safety Plug that can be removed to prevent the machine from turning on.

The three pronged knob on the left front controls the tilt angle of the table, called the Bevel Scale.  On the right side of the front is your variable speed control.  For the Ryobi the speed range is from 550 r/min. to 1,650 r/min.

 

 

 

Scroll Saw Blades

scroll saw bladesScroll saws use two styles of blades – pinned and unpinned.  Pinned blades have a small metal cross bar at the top and bottom of the blade that slides and locks into the blade holders.  This gives a strong, secure anchor for the blades.

Unpinned blades do not have the cross blades, and are simply straight at the top and bottom.

 

 

 

fretwork scroll sawingThe unpinned blades are used in fretwork where you will be cutting holes into the design.  Begin by drilling a small hole, just slightly larger than the width of your saw blade, inside of the shape that you will be cutting.  Release the Tension Knob on the top of the machine.  Release the top Blade Holder Knob.  Remove the top of the blade from the scroll saw.  Slide the wood over the top of the blade, threading it through the drilled hole.  Secure the top of the blade by tightening the Blade Knob and Tension Knob.

Saw blades are sorted by the number of teeth per inch, TPI.  The Ryobi Specialty Scroll Saw Blade Set gives you three sizes – 7 TPI Hook Tooth for thick widths of wood, 15 TPI Regular Tooth for general cutting, and 18.5 TPI Skip Tooth for fine and tight turned cutting.  For our projects in this seminar I used the 15 TPI regular tooth, pinned blades.

Cross-Crafting Scroll Saw Basics Read More »

Scroll Saw in Pyrography

Cross-Crafting Seminar Supply List

wood carving toolsSupply List for our cross-crafting seminar includes tools for scroll sawing, wood carving, pyrography, and colored pencil art.

Cross-Crafting Seminar Introduction
Cross-Crafting Seminar Supply List
Cross-Crafting Seminar Free Patterns
Cross-Crafting Seminar, Scroll Saw Basics
Cross-Crafting Seminar, Setting Up Your Scroll Saw
Cross-Crafting Seminar, Scroll Sawing the Wood Spirit Face
Cross-Crafting Seminar, Wood Burning the Wood Spirit Face
Cross-Crafting Seminar, Colored Pencils for the Wood Spirit Face

The tools I am listing are tools that I own and use on a consistent bases. But, of course, you can substitute with the tools you already own.  As a teacher I always suggest that you start a new hobby with an entry-level tool set, not a dirt-cheap tool set.  Begin with the best set you can easily afford, then if you love the craft as I do you can add new, higher quality tools as you discover what style of carving or pyrography you will be doing.

As example, as a pyrographer I suggest that you start with a basic Walnut Hallow Versa-Tool which will cost you between $25 to $30.  This lets you experience wood burning before you decide if you want to invest in higher units as the Colwood or Optima, which can cost around $175 with burning unit and two or three pens.

For an in-depth look at a wood carver’s tool kit please visit Basic Tool Kit for the Wood Carver.

 

Basswood carving wood

3/8″ to 1/2″ thick x 3″ wide x 12″ long basswood blanks for shallow, stirring spoons or hair combs
3/4″ to 1″ thick x 3″ wide x 12″ long basswood blanks for deep, dipping spoons

I purchase my basswood off of EBay.com because I can see the actual wood that I am purchasing.  Most basswood offerings on EBay are available in multiple packs of boards, all cut to the same dimension.  Search under ‘basswood carving wood’.  For larger boards search under ‘basswood lumber’.

 

Ryobi Scroll SawScroll sawing

Ryobi 16″ variable speed scroll saw

Assorted Ryobi scroll saw blades

Safety glasses

Please stop by our opening post for this cross-crafting seminar for a quick look at the Ryobi 16″ Variable Speed Scroll Saw.

 

 

Interchangeable tool and handle wood carving setsWood carving beginner’s tool set

Set of wood carving tools – straight chisel, skew chisel, v-gouge, large round gouge, small round gouge.  Below is a listing of four suggested sets that will not only get you started in wood carving, but will last you for years.

Available on Amazon.com – 8 pc Woodpecker big  wood carving tool set
This is an excellent beginner’s carving kit with large tools that can be used by hand or with a mallet.  For our project it contains a deeply bend round gouge, perfect for deep bowled spoons.  Also included is two wide sweep gouges and two tight round gouge.

Available on Aliexpress.com – 8 pc Woodpecker big wood carving tool set
This is the same set as described above but through Aliexpress, a selling site based in China.  The price is quite different, but you will have to wait up to three weeks for the tools to arrive in the mail.

Available on Aliexpress.com – 8 pc Woodpecker small wood carving tool set
Woodpecker also makes a small carving tool set which is perfect for a beginner carving that will be working multiple styles of wood carving.

Available on Amazon.com – Flexcut 11pc interchangeable blade tool set
The Flexcut set has one handle and 11 interchangeable blades. The blades are easy to change-out and hold securely in the handle. This is a great set that will last you for many, many years if you have a little extra to invest.

Available on Amazon.com – Ramelson 6 pc palm carving set 117
I have used Ramelson tools for nearly thirty years.  They are thin bladed tools that hold a crisp, perfect edge and priced reasonably for the beginning carver.  The palm handles are wonderful for those of us that have arthritis as the push of the cutting stroke comes from the center of the palm of the hand instead of from the fingers.

 

Choosing quality steel bench knives for wood carvingBench knife

Available from ChippingAway – ChippingAway.com large chip carving knife

Available on Amazon.com – Flexcut 1pc Carving Knife

Available on Amazon.com – Flexcut 3pc Carving Knife Set

 

 

Walnut Hollow Versa-ToolPyrography

Below each pyrography tool listed is a link to an in-depth seminar that will not only give you a free, step-by-step project you can start today, but also allow you to see each of the three pyrography tools in use to help you decide which unit is the best for you.

These three in-depth tutorials are hosted on a wood carving forum.  Unfortunately I am banned/blocked from posting to this forum now because of technical difficulties on this forum.  So, if you have questions or comments about these three projects please email me here, through my blog.  Do not post to these threads as I can not read, see, or answer your questions there!

Walnut Hallow Versa-Tool

Walnut Hollow Versa-Tool Toucan Project  –  Looking for that first wood burning tool, then take a few moments and read through this tutorial for an in-depth review of the Walnut Hollow Versa-Tool used to wood burn a Toucan Family.

Colwood

Colwood Winter Birdhouse Wood Burning Tutorial – This in-depth, step-by-step project focuses on a winter bird house wood burning scene.  The project takes you from the initial tracing of the design to the final coloring steps.

Optima

Irish Optima Pyrography Seminar  – This in-depth pyrography project shows over 250 detailed, close-up photos, step-by-step instructions, and in-depth explanations of texturing, shadings, and fine line work used to create the Advertising Barn landscape.

 

Pyrography Pen Tips by IrishSuggested pyrography tool pens

For more information of pyrography pen tips and what style of burned stroke each creates please download our free PDF on Pyrography Pen Tips, posted on our Wood Carving and Pyrography Pattern website, ArtDesignsStudio.com.  Scroll down to the lower portion of the page.  Please chose pens that are manufactured by the company that made your wood burning unit.

general writing or fine line tip – ball tip or loop tip pen
general shading tip – spear tip or pointed shader tip

 

tracing a pyrography patternGeneral supplies

Sharpening stones, leather strop, and honing compound
For more information please read our blog posting on Sharpening Your Carving Tools

Sandpaper – 100-grit to 220-grit sandpaper, sanding blocks in assorted grit sizes, foam-core finger nail files

Carving gloves – Please check what size glove you need before ordering!

Available on Amazon.com – NoCry Cut Resistant Gloves

Available on Amazon.com – Boss Knit Kevlar Gloves

 Lora Irish color chartBrown paper bags

Graphite paper

#4 – #6 soft graphite pencil for tracing

Masking tape or painters tape

 

Set of colored pencils

Available on Amazon.com – PrismaColor set of 12 soft-core pencils

Available on Amazon.com – PrismaColor set of 72 pencils

 

Cross-Crafting Seminar Supply List Read More »

Lora Irish Free Online Wood Carving and Wood Burning Seminars

Lora Irish Free Online Seminars

Since Mike and I came to the web in 1997 I have posted a free, online, step-by-step seminar each year.  Many of those seminars are posted right here on our blog at LSIrish.com, and some were posted to other wood carving, wood burning community forums.  Before I start posting this year’s free seminar – Cross Crafting Wood Carving, Pyrography, and Scroll Saw Project – I thought you would enjoy a list with links to some of our favorite past projects.

Our newest free, online seminar – starting tomorrow, August 4th, 2016 – takes a fun look at scroll sawing, wood carving, and pyrography and how easy it is to cross-craft these hobbies.

Cross Crafting Wood Carving. Pyrography, and Scroll Saw Free Project

This year’s free, online smeinar links:

Cross-Crafting Seminar Introduction
Cross-Crafting Seminar Supply List
Cross-Crafting Seminar Free Patterns
Cross-Crafting Seminar, Scroll Saw Basics
Cross-Crafting Seminar, Setting Up Your Scroll Saw
Cross-Crafting Seminar, Scroll Sawing the Wood Spirit Face
Cross-Crafting Seminar, Wood Burning the Wood Spirit Face
Cross-Crafting Seminar, Colored Pencils for the Wood Spirit Face

Posted here at LSIrish.com

irish_tiki_0002Whittle Tiki Chess Set  – Wood Carving
This beginner’s wood carving project will guide you through the cutting strokes that create those wonderfully expressive Tiki faces.  Includes the free patterns to make your own chess set.

Basics to Painting – Painting your Wood Carving and Wood Burning
Have fun exploring the numerous techniques you can use to add coloring to your wood burnings, wood carvings, and scroll saw projects.

Postage Stamp Pyrography – Pyrography and wood burning
Have a little fun tonight working through how easy it is to wood burning Celtic interlocking lines and knots.

Canada GooseRelief Canada Goose Carving Seminar – Relief wood carving, pyrography, and painting
Explore the basic techniques used in relief wood carving, including working in layers and levels, undercutting, and smoothing the background.  Then add fine detailing using your wood burning tool.  Finish this step-by-step project by creating realistic coloring using the dry brushing technique.

Whittle Fish Seminar – Wood carving
Ice fishing decoys are quick, easy, and extremely fun to carve.  All you need is a bench knife, a few pieces of basswood, some scrap leather or copper sheeting, and some imagination.  Since these are primitive art, anything goes when carving fish decoys.

LSIrish_chip0009Chip Carving Seminar – Chip Carving, wood carving
Chip carving is a specialty area in wood carving.  With the use of a short-bladed chip carving knife, small triangular cuts create intrigue motifs and designs.  Includes a full-sized sampler pattern.

Celtic Dragon Plaque – Relief wood carving
This is an entry-level carving project for both relief carving and for working the interlocking patterns of the Celtic Knot

Wood Spirit Carving – Wood carving, cane and walking stick carving
Carving a human face into your next walking stick or cane is quite easy when you follow the step-by-step cuts shown in Carving the Planes of the Human Face.

Free Lora IRish Cane Carving ProjectTwistie Snake Carving – Wood carving, cane and walking stick carving
Not all of us are blessed to have a backyard wood lot where we can cultivate sassafras trees and honeysuckle vines for twistie stick canes.  So in this in-depth tutorial learn how to carve that twisted stick pattern using a bench knife, a few small gouges, and basswood.

Pyrography Doodles – Pyrography and wood burning
If you have the burning desire to try your hand at the zen doodle craze or modern tribal tattoo look, you will want to read through this step-by-step wood burning project that uses textures, line designs, and fill patterns to create the finished mushroom design.

 

 

Irish_pixie_13Pyrography Steps to Portrait Burning – Wood burning and pyrography
Learn how to create realistic shadows and highlights in the human face in your next wood burning project.

Cougar Pyrography Project – Wood burning and pyrography
Learn how to create the fine fur in an animal portrait that incorporates realistic shading and shape to the animal’s face.

 

 

 

Pyrography Mask Project by IrishCeremonial Mask Pyrography – Pyrography and wood burning
This step-by-step project uses lots and lots of photos to guide you through an in-depth design created for first-time wood burners.

Pyrography Leather Burning – Leather burning and leather pyrography
Want to try your hand at leather burning?  Then this tutorial is just what you are looking for.  Includes not only the step-by-step photo instructions but also includes the binding steps for making your own leather artist journal.

 

 

Posted on Other Message Boards or Forums

Please note that the following free L S Irish seminars and in-depth projects were posted by me, before we opened LSIrish.com, and are hosted on another forum.  I am not responsible for this forum nor a member of this forum at this time.

Please note that you will need to sign-up as a member of this forum to have access to the photos included in each of the tutorials. 

If you have questions about these projects please contact me directly, here at LSIrish.com or on my Facebook account, as I can not reply to you on this forum.  If you do reply of any of these free tutorial, it will bring these threads to the front of the message board where other members may answer you.

freen man relief carving by Lora IrishRelief Carving Wood Spirit Grape Man WIP – Over 250 detailed, close-up photos with step-by-step instructions of relief carving the wood spirit, green man face.  This thread has had over 69,000 views!

Levels in Relief  –  Learn how to break you carving pattern into levels for easy carving.  This project will teach you how to identify the sky, background, mid-ground, and foreground of any design.

Burning your carvings  – Pyrography can be an important technique for your wood carving.  So learn how to use your wood burner to clean-up fine wood fibers, add detailing, and even add fine shaping to your next wood carving project.

African Mask Low Relief Carving  – The African Mask project focuses on how to establish the levels of a relief wood carving during the rough-out stage of work.

Irish Pyrography Seminar  – This in-depth pyrography project shows over 250 detailed, close-up photos, step-by-step instructions, and in-depth explanations of texturing, shadings, and fine line work used to create the Advertising Barn landscape.

Walnut Hollow Versa-Tool  –  Looking for that first wood burning tool, then take a few moments and read through this tutorial for an in-depth review of the Walnut Hollow Versa-Tool used to wood burn a Toucan Family.

Winter Birdhouse Wood Burning Tutorial – This in-depth, step-by-step project focuses on a winter bird house wood burning scene.  The project takes you from the initial tracing of the design to the final coloring steps.

Lora Irish Free Online Seminars Read More »

Lora Irish Free Wood Carving Projects

Summer School is in Session

Trapped inside because of the heat?  Bored with too much time of your hands?
Well, grab your carving tools, leather strop, and some basswood blanks
and join me in a little carving fun.  If you don’t find something below that
interests you, check out our Wood Carving Project page for more ideas and for
basic instructions to the craft of wood carving.

http://www.lsirish.com/wp-content/uploads/2014/01/large-Chip-Carving-28.jpg

Free Chip Carving Online Seminar

Learn the easy and fun technique of chip carving with Lora Irish’s free
online seminar.  Ten full pages, lots of free patterns, step-by-step instructions.

Free Lora IRish Cane Carving Project

Twistie Stick Snake Carving Free Project

Ready to carve your first walking stick.   This ten page, step-by-step
free carving project by Lora Irish will teach you everything you need
to create your own Snake and Twistie Stick cane.

http://www.lsirish.com/wp-content/uploads/2013/06/lsirish-relief-goose.jpg

Relief Wood Carving Canada Goose Project

This indepth step-by-step free relief carving project by Lora Irish
includes how to work a relief wood carving, how to use your
pyrogrpahy and wood burning in your carvings, and how to
add color to your relief carvings.

http://www.lsirish.com/wp-content/uploads/2013/12/Irish_fish_023.jpg

Wood Carving Fish Decoys

Fish decoys are fast, easy, and fun.  A few hours, a couple of
basic carving tools, and a little imagination is all it takes to complete
this free online wood carving project by L. S. Irish.

**********

Visit Lora Irish’ craft, wood carving, and
pyrography pattern and e-projects website.
ArtDesignsStudio.com

 

Spring 2016 LSIrish Free Pattern

How to Download

Click on the link above for a printable set of instructions.
Here are three free downloads for your to practice!!!!

Irish Free 2015 Pattern Pack
Spring 2016 Free Celtic Animal Pattern Pack

The link above is a Freebie Pattern Package which you can use to learn how to download, extract, and print our patterns.

  1. Click on the link above.
  2. A Window will pop up titled: Opening Irish-Free-2015-Pattern-Pack.zip.
    In that window select “Save File”, not “Open With”. In the bottom right hand area of the Window select “Save”.
  3. A new Window will pop up that has the directory to your computer. That window will want to save the file in “Your Downloads”. You can select another area in your computer to save the file. In the left nav area of the window, scroll up and click on “My Desktop”. Chose where In the bottom right of the window select “Save”.
  4. Minimize your browser by clicking the line button in the upper right hand corner of the screen. This will drop the browser window down so that you can check your Desktop to see if the zip file is there. Sometimes the icon for a zip file or downloaded PDF file does not show up on your Desktop even though your computer downloaded the file. If you don’t see your zip file move your cursor into any empty space on your Desktop and right-hand click. This will open a small menu Window. From that menu select “Refresh”. This will reload your Desktop view and your icon should appear. If you still don’t see your zip icon then go check “My Downloads” as it may be there.
  5. Place your cursor on the zip icon and right-hand click. A Window will pop up, select “Extract All”.
  6. A new Window will pop up which allows you to decide where to extract the file, I usually chose to extract it as the file tells me in the location portion of this window. Select “Extract”.
  7. After the package is extracted you should have a new Window that shows the opened file folder. You can click on that folder, open the file and begin printing your patterns. You should also have two files on your Desktop now, one is the original zip file, and the other the extracted, open folder. Save the zip file to “My Downloads” or “My Documents”, you can open this file over and over again. Save the opened folder to whatever folder system you use for your craft projects and patterns.
  8. Note – If you double left-hand click on an un-extracted zip file you will see a folder window and you can see the patterns inside that folder. But since the file has not been extracted you can not print. So, if you can’t print you probably have not extracted the zip.
  9. Email me, Contact Us in the top nav bar, and I will help you through the process!

Lora Irish Free Wood Carving Projects Read More »

Scroll to Top